• DNS server not responding error in Windows 10 prevents you from browsing the web.
  • If the DNS server is not responding in Windows 10, you can try to change the server manually.
  • You can also reconfigure your connection to correct this annoying error.
  • Installing the latest drivers can also be a great solution to this problem.

DNS Server Is Not Responding On Windows 10

To fix various PC problems, we recommend Restoro PC Repair Tool:

This software fixes common computer errors, protects you from file loss, malware, hardware failure and optimizes your PC for maximum performance. Fix PC problems and remove viruses in 3 easy steps:

  1. Download the Restoro PC Repair Tool which comes with patented technologies (patent available here).
  2. Click Start Scan to find Windows issues that could be causing PC problems.
  3. Click Fix All to fix issues affecting your computer’s security and performance
    Restoro was downloaded by 953,019 readers this month.

The DNS server is a crucial part of the Internet. Unfortunately, few users have reported that the DNS server is not responding to error messages on their Windows 10 PC, so we will show you how to fix this problem.

To access a website on the Internet, you must first access the DNS server. Once your request has been received by the DNS server, you will be redirected to the desired website.

What to do if the DNS server is not responding on Windows 10? The fastest solution is to manually change the DNS server settings. Then disable your firewall, reboot your router and test the connection again.

If the error persists, use the additional troubleshooting methods below to learn how to fix DNS server in Windows 10.

How do I fix DNS server not responding error on Windows 10?

  1. Change the DNS server manually
  2. Enter your MAC address manually
  3. Install the latest drivers
  4. Disable your antivirus and firewall
  5. Update your router’s firmware
  6. Use the netsh . command
  7. Restart your modem
  8. Start your PC in safe mode
  9. Disable Microsoft Virtual WiFi Miniport Adapter
  10. Internet protocol version 6 . Switch off
  11. Disable all additional connections
  12. Check for third-party apps
  13. Change the DNS address on your router
  14. Restart your router
  15. Disable the peer-to-peer update feature
  16. Wait for your ISP to fix the problem
  17. Fix Comcast DNS Server Not Responding

1. Change the DNS server manually

  1. Open Network Connections. You can do this by pressing Windows key + X on your keyboard and choosing the Network Connections option.

DNS Server Is Not Responding On Windows 10

2. Locate your network connection, right click and select Properties from the menu.

DNS Server Is Not Responding On Windows 10

3. When the Properties window opens, select Internet Protocol Version 4 (TCP/IPv4) and click the                         Properties  button.

DNS Server Is Not Responding On Windows 10

4. Now select Use the following DNS server addresses option.
5. Enter 8.8.8.8 as the preferred DNS server. As for the alternate DNS server, you need to enter 8.8.4.4. If                  you prefer, you can also use 208.67.222.222 as the preferred server and 208.67.220.220 as the                           alternate   DNS  server.
6. When you’re done, click OK to save your changes.

DNS Server Is Not Responding On Windows 10

7. Optional: Disconnect and reconnect to the Internet.
When you try to access a particular website, it automatically connects to your ISP’s DNS server.

However, your DNS server may not be available. If so, you will see the error message DNS server is not responding.

One way to solve this problem is to change your DNS server to OpenDNS or Google DNS. This is a fairly simple procedure and you can do it by following the steps above.

After changing the DNS server, check if the problem is solved. You should be able to surf the web without any problems.

Keep in mind that changing your DNS server can slow down your internet connection a bit depending on your location, so you can experiment with different servers.

2. Enter your MAC address manually

2.1 Locate the physical address of your PC

  1. Type cmd in the Windows 10 search tab and click Run as administrator at the command prompt.DNS Server Is Not Responding On Windows 10
  2. Enter ipconfig /all and press Enter.
  3. Now the information list appears. Find the physical address and write it down.
  4. Close the command prompt.

2.2 Configure your network connection

  1. Open the Network Connections window.
  2. Find your connection and open its properties.
    When the Properties window opens, click Configure.

DNS Server Is Not Responding On Windows 10

3. Go to the Advanced tab and select Network Address from the Properties list.
4. Now select Value and enter the MAC address you got from the command prompt (make sure you don’t                      enter dashes while entering your MAC address).

DNS Server Is Not Responding On Windows 10

5. Click OK to save the changes.
According to users, DNS can sometimes fail by manually entering the MAC address of your network adapter.

This is a simple procedure and to enter your MAC address you must first find it. To do this, follow the steps above.

Users report that this solution works best after switching to Google DNS or OpenDNS, so be sure to give it a try.

If you need to change your MAC address, you can use one of these MAC address change tools.

3. Install the latest drivers

3.1 Update your drivers manually

  1. Press Windows Key + X and choose Device Manager from the list.

DNS Server Is Not Responding On Windows 10

2. When the Device Manager opens, locate your network adapter, right-click it and choose Uninstall.

DNS Server Is Not Responding On Windows 10

3.  Now the confirmation window appears. If available, click Uninstall driver software for this device,                   and  then click Uninstall.

DNS Server Is Not Responding On Windows 10

4. After uninstalling the driver, restart your PC.
5.When your PC restarts, the default network driver will be installed. Check if the problem is solved.
6.If the problem persists, install the latest drivers for your network device and check if that fixes the                               problem.
Your network adapter relies on drivers to work properly, and if you have a problem with it, it could be due to your drivers.

To fix DNS server errors in Windows 10, you need to visit the network adapter manufacturer’s website, download the latest drivers and install them on your PC.

If you can’t access the internet at all, the DNS server may not be available, so download the drivers on another device and install them on your PC.

Some users also recommend uninstalling network drivers before installing new ones.

3.2 Update drivers automatically

Downloading drivers manually can damage your computer if you downloaded the wrong version. We strongly recommend that you do this automatically using a third-party tool.

The tool recommended below is extremely lightweight and will automatically repair or update your drivers in just seconds in one go. You just need to invest a few clicks and the problem will disappear.

⇒Get driver fix

4. Disable your antivirus and firewall

DNS Server Is Not Responding On Windows 10

Antivirus and firewall solutions are necessary if you want to protect your PC from malicious users, but sometimes your antivirus and firewall can interfere with your Internet connection.

To resolve DNS server connection issues in Windows 10, you can try temporarily disabling your firewall and antivirus client.

Keep in mind that your PC is protected by Windows Defender even if you disable your antivirus so you don’t have to worry about its security.

If your antivirus or firewall client was causing this problem, make sure to change your settings or switch to a different client.

Users reported that Bitdefender Total Security can sometimes cause this issue. If you are using Bitdefender, you need to go to the Firewall settings and disable the Block Internet connection sharing option.

After that the problem should be solved. Users reported that Avast can also cause this issue. To fix it, simply open the Avast Settings and disable the Secure DNS option.

You can also try disabling the firewall on your router. This is a somewhat advanced and potentially dangerous solution, so keep that in mind. Disabling your router’s firewall leaves your PC completely vulnerable.

If you decide to do that, temporarily disable your router’s firewall and see if that fixes the problem.

If the problem was your firewall, you will need to re-enable it and check your firewall settings to determine the cause of the problem.

Refer to the manual to learn how to disable your router’s firewall.

5. Update your router’s firmware

Few users have reported that DNS servers may not respond when using wireless networks. However, you can easily fix it by updating your router’s firmware.

We must warn you that this is an advanced process, so you have to be very careful to avoid damage.

Back up your settings before updating your router’s firmware. To see how to properly update the firmware, we recommend that you refer to the accompanying manual.

If your DNS server is not responding to Wi-Fi/Wireless, you may also want to check the channels you are using.

6. Use the netsh command

DNS Server Is Not Responding On Windows 10

  1. Open the command prompt as an administrator.
  2. When the command prompt opens, type:
    ip netsh int restart
    netsh winsock reboot
    ipconfig /flushdns
    ipconfig / refresh
  3. After you have completed all the commands, restart your computer.
    According to users, you can easily fix the DNS error by running some commands from the command prompt. To do this, follow the steps above.

Running these commands will reset your IP and clear your DNS cache, so be sure to try this method.

7. Restart your modem

DNS Server Is Not Responding On Windows 10

One way to fix the DNS server error in Windows 10 is to restart the modem. To do that, simply press the power button on your modem to turn it off.

Wait 30 seconds and press the power button again to turn it on. Wait for the modem to boot up completely and check if the problem persists.

8. Start your PC in Safe Mode

DNS Server Is Not Responding On Windows 10

  1. Open the Start menu and click the power button. Hold down the Shift key on your keyboard and click Restart.
  2. You will see three available options. Choose Troubleshoot.
  3. Select Advanced options, select Startup Settings and click the Restart button.
  4. When your PC restarts, you will see a list of available options. Select Safe Mode with Networking by pressing F5 on the keyboard.
  5. Safe mode will now start.

Sometimes third-party applications such as antivirus or VPN tools can interfere with your internet connection.

To fix DNS server not responding in Windows 10, you should try to access the internet from safe mode.

If you are not familiar, Safe Mode is a special mode in Windows that only works with basic software and drivers.

When Safe Mode starts, check if your network connection is working. If there are no problems with your internet connection in safe mode, it means that third-party software is interfering with your network connection.

To solve this problem, you need to find and uninstall the problematic application from your PC.

Editor’s Note: This article continues on the next page. If you want to read more about optimizing your internet connection, feel free to take a look at our collection of guides.

Similar Posts